CANNULA

 

Please refer to our Primo Liposculpture pdf

for details of our wide range of liposuction equipment.

 

 

If you have special instructions we can custom make the cannula to the surgeon's specifications. We distribute all of the most popular tip styles, as well as many others. To have a Cannula custom made, please supply the desired tip style, hand or hub style, lumen lengths (in centimeters), and lumen diameter (in millimeters). This will take longer so please allow

a further 3- 4 weeks 

FILTERS

 

Designed specifically for high-flow aspirations, this filter could save you from a costly aspirator breakdown, and is a must for tumescent technique procedures. The filter has 144 sq/in of effective filtration area, and is not a paper filter compared with others. This is a 0.3 micron filter and has a D.O.P.

Rating of 99.975%, which meets or exceeds industry standards. The filter can handle flow rates of up to 225 litres per minute and is a must for the protection of your staff and your equipment. Provided six to the case.

 

CANNULA CLEANING BRUSHES

Firm-shaft cannula cleaning brushes now available! We are pleased to introduce a new line of brushes for cleaning liposuction cannula that features a unique stainless-steel tubing shaft. These brushes are designed to remain straight within the cannula lumen during the cleaning process, unlike previously available brushes made with twisted wire shafts that bend or collapse after a few uses.

Available in five sizes (2mm through 6mm), the brushes fit the full range of cannula sizes used in most surgeries.

SYRINGE LOCKS

These useful devices are a must for syringe aspiration. Both devices lock the barrel in place thereby eliminating the need to hold the syringe barrel back during aspiration procedures. The  snap lock and the horseshoe lock are both available in 60cc, 35cc, and 10cc sizes. 


 

The IP is safer than other canister systems. After the procedure, the liner containing the aspirant is removed and disposed of... with NO HUMAN CONTACT. This protects all personnel from possible contamination from the aspirated matter.

INFUSION HANDLE

This infusion handle, with on/off control, offers maximum control for infusion during the  lumescent technique. A push button on the handle allows the local anaesthetic to flow through the handle to the needle. Once the button is released the flow is effectively stopped, which will end annoying leaks and sprays that can be a part of this procedure.

The handle is also equipped with the proper leur-lock to allow it to attach to an I.V. extension and accept any leur-lock needle.

We can have cannulas custom-made to the surgeon's specifications. We can supply all of the most popular tip styles, as well as many others. To have a cannula custom made, please supply the desired tip style, hand or hub style, lumen lengths (in centimeters), and lumen diameter (in millimeters).

INJECTION GUNS

The ratchet of this micro-injection "gun" enables controllable and measurable results. Each pull of the handle injects the precise quantity where it's wanted. Available in 5cc, 10cc, 30cc and a new 60cc size.

INJECTION NEEDLES

These can be used with a standard leur-lock syringe or the reinjection gun above. Placement of holes on the needles allows for precise injection and maximum control.

RE-USABLE CANISTER SYSTEM

The advent of disposable canisters has been a welcome addition to aspiration procedures, but there has been a major problem when used with high powered aspirators...IMPLOSION. The High Impact Canister is made from space-age plastics, virtually eliminating the danger of implosion. It features a reusable canister in combination with a disposable liner. The liner is composed of a drainage receptacle and cap in a one-piece unit, thus eliminating leakage and the problem of caps coming loose during surgery.